Dialogic DMG1008DNI Bedienungsanleitung PDF herunterladen (Seite 4)

2.3. Cabling Requirements

It is recommended that total loop length (cable distance between PBX connection and the gateway

interface) be no longer than 3000 feet (915 meters) and no shorter than 6 feet (2 meters).

3. Summary and Limitations

A check in this box indicates the UM feature set is fully functional when using the PBX/gateway

in question.

4. Gateway Setup Notes

During the initial setup of the gateway using the serial port, you must:

• Assign the gateway a Unique IP address, subnet mask and network gateway address (if the

latter is required).

• Configure the gateway to use the SIP VoIP protocol.

• Configure the gateway for the Avaya integration.

During the solution-specific setup of the gateway using the web interface, you must:

• Configure the gateway with at least a single IP endpoint pointing to your messaging server. If

multiple IP endpoints are to be used, then ensure they are configured as well.

• Activate fault tolerance and load balancing as required by the application and system

requirements.

• Specify the required audio coders as required by the application.

• Set the hunt group extension number to the extension number you will be using for your hunt

group in the PBX programming.

• Configure the SIP Transport for TCP.

1 2 3 4 5 6 7 8 9 ... 21 22

Keine Kommentare

Dialogic DMG1008DNI Bedienungsanleitung Seite 4