Dialogic Brooktrout TR1034 BRI Bedienungsanleitung PDF herunterladen (Seite 16)

16 Chapter 1 Brooktrout Analog Fax Boards

5. Enter the following command:

Fax -u Channel -r test2.ipk

Where Channel is the number of the DID channel that will be receiving the test fax (use 0 (zero)

for the first channel 1 for the second channel, etc.)

6. Without closing the first command prompt window, open a second command prompt window

and change to the RightFax\RFBoard folder on the RightFax server.

7. Enter the following command:

fax -u Channel -s ,,1234 test1.ipk

Where Channel is the number of the loop-start channel that will be sending the test fax (use 0

(zero) for the first channel, 1 for the second channel, etc.)

8. Watch both command prompt windows. You should be able to see status messages as the fax is

sent and received by the board. If you receive error messages, you may have a problem with

your fax boards or the board configuration settings.

Testing boards with DID channels only

1. Open a command prompt and change to the RightFax\RFBoard folder on the RightFax server.

2. For each channel to test, enter the following command:

Fax -u Channel -r test2.ipk

Where Channel is the channel number to test (use 0 (zero) for the first channel, 1 for the second

channel, etc.)

3. Connect a standard analog (not PBX) telephone to the DID cable coming from the board that

corresponds to the channel number you are testing.

4. Pick up the handset, dial any four digits, and then listen for a fax tone.

8 If you hear the digits as you dial them but do not hear a fax tone, confirm that you have

correctly plugged the cable that corresponds to the channel number you are testing into the

telephone.

8 If you do not hear the digits as you dial them, check that the DID power supply is properly

connected to the board and plugged into a powered outlet.

If you hear a fax tone but have problems receiving faxes on this channel, then the problem most

likely lies with the phone company’s configuration of your DID circuit.

  

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Keine Kommentare

Dialogic Brooktrout TR1034 BRI Bedienungsanleitung Seite 16