Dialogic Brooktrout TR1034 BRI Bedienungsanleitung PDF herunterladen (Seite 18)

18 Chapter 2 Brooktrout Digital Fax Boards

Supported Brooktrout TR114 Series Digital Fax Boards

The TR114 family of digital fax boards consists of models with up to 16 channels for your T1, E1,

PRI-ISDN, or BRI telephone lines. Instructions in this chapter apply to all supported TR114 digital

boards unless otherwise noted. If you are installing analog fax boards, see ”Installing Brooktrout

TR114 Series Analog Fax Boards” on page 9. RightFax currently supports the following TR114 series

digital fax boards.

In Brooktrout’s naming scheme, “TR114” is the board model, “I” or “P” indicates ISA or PCI,

followed by the number of channels, and then a letter indicating the type of bus used to

communicate with network interface card (MVIP or PEB). “+T1” in the board model number

indicates that the board includes an on-board digital interface and does not require a separate

network interface card.

For information on configuring the base I/O address, interrupt header, and MVIP settings of your

digital fax board and network interface card, please refer to your Brooktrout documentation.

Table 2B Supported TR114 Series Digital Fax Boards

Board model Description

TR114-I12V 12 channel MVIP-only ISA digital fax board. Requires TRNIC network interface card.

TR114-I16V 16 channel MVIP-only ISA digital fax board. Requires TRNIC network interface card.

TR114-I2+BRI

2 channel ISA digital fax board with built-in BRI interface (supported in Europe only).

Does not require TRNIC network interface card.

TR114-I2P

2 channel PEB-only ISA digital fax board. Requires TRNIC network interface card.

Although this board is fully supported by RightFax, you must configure and install the

board exactly as you would the MVIP version TR114-I2V.

TR114-I2V 2 channel MVIP-only ISA digital fax board. Requires TRNIC network interface card.

TR114-I4+BRI

4 channel ISA digital fax board with built-in BRI interface (supported in Europe only).

Does not require TRNIC network interface card.

TR114-I4P

4 channel PEB-only ISA digital fax board. Requires TRNIC network interface card.

Although this board is fully supported by RightFax, you must configure and install the

board exactly as you would the MVIP version TR114-I4V with one exception.When

prompted for a bus interface, select PEB.

TR114-I4V 4 channel MVIP-only ISA digital fax board. Requires TRNIC network interface card.

TR114-I8P

8 channel PEB-only ISA digital fax board. Requires TRNIC+I24T network interface card.

This board must be configured in the RightFax board configuration as a TR114+I8V

(when prompted for a bus interface, select PEB) and installed using the instructions that

come with the fax board.

TR114-I8V 8 channel MVIP-only ISA digital fax board. Requires TRNIC network interface card.

TR114-I8V+T1

8 channel MVIP-only ISA digital fax board with built-in T1 interface. Does not require

TRNIC network interface card.

TR114-P16V 16 channel MVIP-only PCI digital fax board. Requires TRNIC network interface card.

TR114-P2+BRI

2 channel PCI digital fax board with built-in BRI interface (supported in Europe only).

Does not require TRNIC network interface card.

TR114-P2V 2 channel MVIP-only PCI digital fax board. Requires TRNIC network interface card.

TR114-P4+BRI

4 channel PCI digital fax board with built-in BRI interface (supported in Europe only).

Does not require TRNIC network interface card.

TR114-P4V 4 channel MVIP-only PCI digital fax board. Requires TRNIC network interface card.

TR114-P8V 8 channel MVIP-only PCI digital fax board. Requires TRNIC network interface card.

TR114-P8V+T1

8 channel MVIP-only PCI digital fax board with built-in T1 interface. Does not require

TRNIC network interface card.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic Brooktrout TR1034 BRI Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Dialogic Brooktrout TR1034 BRI