Dialogic Brooktrout TR1034 DID, Combo, & Loop Start Bedienungsanleitung PDF herunterladen (Seite 79)

8. In the Fax Web Server field, enter the address at which your Fax Server responds to http requests,

according to the following syntax:

[{http|https}://]<ServerName_or_IP>[:<Port>]

The value can be a host name or an IP address, can include a specific port number and can specify the

type of protocol used (normal or secured).

Examples: faxserver, or http://10.60.0.76:8080, or https://faxserver

Note: If you enter an address with HTTPS, the following string must be the Common Name of your

Fax Server, (which is often the Host Name) and not its IP address. For more information on all other

required HTTPS configurations (server and client side), see Secured HTTP (HTTPS) Configurations

on page 33.

9. Click Next.

The SendFAX Connection Configuration dialog appears, if SendFAX was selected for the installation.

10. For the SendFAX Connection Configuration dialog box, select the mode SendFAX sends faxes through:

• The default option: The fax server’s XML gateway interface, or

• The Outlook mode, which can be used if your Microsoft Exchange server has been configured for it.

XMediusFAX | Installation and Maintenance Guide 69

Chapter 8 | Client Applications: Installation

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 101 102

Keine Kommentare

Dialogic Brooktrout TR1034 DID, Combo, & Loop Start Bedienungsanleitung Seite 79