Dialogic 4000 SERIES Bedienungsanleitung PDF herunterladen (Seite 125)

Use Case Examples

Page 125

12. Create a SIP peer for the Microsoft

Mediation Server installed on the gateway computer. To configure this

SIP peer, open the SIP Peers section, click Add, and enter the following parameters:

• Name: Enter a unique name to easily identify the SIP peer.

• Peer type: Select MS OCS 2007/2007 R2 - Mediation Server from the dropdown menu.

• Host: Enter the IP address or host name of the host PC.

• Domain: For the correct domain entry, see the configuration of your Microsoft

Office Communications

Server 2007.

Under Address Normalization, configure the following parameters:

• Dialplan: Select the dialplan you configured for the controller connected to the PBX.

• Number format (outbound): Select International number form the dropdown menu.

• Encoding (outbound): Select Use type flag from the dropdown menu.

Click OK to save the settings and close the window.

13. Create the following routes:

• PSTN to Microsoft

Office Communications Server 2007

•Microsoft

Office Communications Server 2007 to the PBX

•Microsoft

Office Communications Server 2007 to the PSTN

• A route for calls to the reception

In this scenario, the order of the routes is important because of the used conditions.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 167 168

Keine Kommentare

Dialogic 4000 SERIES Bedienungsanleitung Seite 125