Dialogic 4000 SERIES Bedienungsanleitung PDF herunterladen (Seite 25)

Dialogic® Diva® SIPcontrol™ Configuration

Page 25

CHAPTER 5

Dialogic

Diva

SIPcontrol™ Configuration

This chapter describes how to configure Diva SIPcontrol. It provides configuration tips and hints, includes general

information about each configuration, and gives an overview of the configurable Diva SIPcontrol parameters.

The configuration of the Diva Media Boards is described in Dialogic® Diva® Media Board Configuration on

page 17.

About Diva SIPControl Configuration

Diva SIPcontrol is configured via the Diva SIPcontrol web interface.

Opening the Dialogic

Diva

SIPcontrol™ Web Interface

To open the Diva SIPcontrol web interface, follow these steps:

1. Click Start > Programs > Dialogic Diva > SIPcontrol Configuration. By default, access to the web

interface is only allowed from localhost (127.0.0.1), and the port number to which the server is listening is

set to 10005.

2. If you need to access the configuration via remote access, you must set a password. To do so:

• Click System control on the left side of the web interface.

The System control window appears:

•In the Password section, enter the current and new passwords, and then retype the new password. A

password must be seven digits or longer, and the use of non-alphanumeric characters for a password is

discouraged.

• Click Change Password.

If necessary, open the port in the local firewall settings. To do this under Windows

Vista, Windows

7, Windows

Server

2008, or Windows 2008

R2, open the command prompt with elevated rights.

Enter the following command on a 64-bit operating system:

netsh advfirewall firewall add rule name="Diva Webserver" dir=in

action=allow program="%ProgramFiles% (x86)\

Diva Server\DivaWebConfig.exe" protocol=tcp

Enter the following command on a 32-bit operating system:

netsh advfirewall firewall add rule name="Diva Webserver" dir=in

action=allow program="%ProgramFiles%\

Diva Server\DivaWebConfig.exe" protocol=tcp

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 167 168

Keine Kommentare

Dialogic 4000 SERIES Bedienungsanleitung Seite 25