Dialogic 4000 SERIES Bedienungsanleitung PDF herunterladen (Seite 13)

Initial Configuration and License Activation

Page 13

CHAPTER 3

Initial Configuration and License Activation

Initial Log On

The initial configuration allows the unit to be configured using a remote desktop connection.

The Dialogic

4000 Media Gateway Series is initially configured with:

• Ethernet port 1: with fixed IP address 192.168.1.1

• Ethernet port 2: with fixed IP address 192.168.2.1

• Ethernet port 3 and 4: enabled with DHCP, only available on older DMG4000 models

Note: The above numbering of the Ethernet ports refers to the numbering at the rear panel of the Media

Gateway and not to the numbering displayed in the Control Panel of your operating system.

• User name: Administrator

• Password: Dialogic (Change the password after the initial log on.)

Preparing for Configuration

Before you start to configure your Dialogic

Media Gateway, it is necessary to gather some information about

the environment in which it will be used.

Collect the following information:

1. In case the gateway is to be connected to a PBX: Which vendor and which PBX type will be used?

2. What protocol will be used on the PSTN/PBX side of the gateway? Examples are EuroISDN (ETSI-DSS1),

Q-SIG, and DMS100.

License Activation

The SIP Control license and V.34 fax license for the default amount of SIP and T.38 fax channels (model-based)

are already installed and activated upon shipment. You must purchase and activate additional licenses, if you

need additional channels for Diva SIPcontrol, G.729 speech compression, or T.38 fax.

During the activation process of the license, you need to choose a Diva Media Board to which the license should

be bound. After having activated the license for this Diva board, the license cannot be transferred to be used

with another Diva board.

Notes:

• Diva SIPcontrol licenses need to be activated via the Diva SIPcontrol web interface, as described under To

Activate the License File on page 15.

• Licenses for G.729 need to be uploaded and activated in the Dialogic

Diva

Configuration Manager. See the

Dialogic

Diva

Configuration Manager Online Help for more information.

•The Dialogic

Host Media Processing (HMP) Software licenses for SIP channels are also valid for SIPcontrol,

but they require the Dialogic HMP software to be installed on the same system as Diva SIPcontrol.

After purchasing the license, you will need to generate and activate it to unlock functionality in the product.

To activate your license key, you need the following information:

• Device Unique ID (DUID)

• Proof of Purchase Code (PPC)

Once you have both, the DUID and PPC, visit the Dialogic

Diva

Activation site to register your PPC together

with the DUID, and you will receive your license file. Activate this license file in the Diva SIPcontrol web interface.

For more information, see To Activate the License File

on page 15.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 167 168

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic 4000 SERIES Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Dialogic 4000 SERIES