Dialogic 4000 Series SU4.1 Bedienungsanleitung PDF herunterladen (Seite 159)

Use Case Examples

151

 National prefix: Enter the national prefix that needs to be dialed for long

distance calls within the country in which the gateway computer is located.

 Access code: Enter the digit that is necessary to get access to the public

network.

 Enable the options PSTN access code provided by SIP caller and Incoming

PSTN access code provided by PBX.

Click OK to save the settings and close the window.

Create five address maps: two for incoming calls, two for outgoing calls, and one for

the special number, which is normally the reception‘s number. The first four address

maps are necessary for either adding or omitting the OAD (Outside Access Digit). See

Creating Address Maps for This Scenario for instructions.

10.

Under PSTN Interfaces, configure Controller 1 with PSTN-specific settings and

Controller 2 with PBX-specific settings. The controller number that you configure with

the PBX-specific settings needs to correspond to the line number in the Diva

Configuration Manager on which you configured the switch type of your PBX. Similarly,

the controller number that you configure with the PSTN-specific settings needs to

correspond to the line number in the Diva Configuration Manager on which you

configured the switch type of your PSTN line.

To configure PSTN-specific parameters, click Details at the right of the controller

connected to the PSTN line, and configure the following parameters:

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 225 226

Keine Kommentare

Dialogic 4000 Series SU4.1 Bedienungsanleitung Seite 159