Dialogic 4000 Series SU4.1 Bedienungsanleitung PDF herunterladen (Seite 82)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

@Domain:

Enter the domain name of the registrar server.

Protocol:

Select UDP if you register as an e-phone gateway.

Re-register

time:

Enter the re-register time in seconds. This is the time for which the

registration to the registrar server remains valid. After this time has

elapsed, the SIP stack service would need to re-register to be available

again. The default value is 3600 seconds.

Auth user

name:

Enter a user name for authentication at the registrar server.

Password:

Enter your password for authentication at the registrar server.

Leave the setting at the default value Standard. Select e-phone

GW only if you use e-phone and you want Diva SIPcontrol to function

as a gateway for e-phone.

Logging and Diagnostics

You can configure the following parameters shown in Logging and Diagnostics section:

Event Log

Level:

A computer with Diva SIPcontrol installed can write different types of

events into the System Event Log. The details for each event log are

described in Event Logging.

Debug Level:

The debug level setting can be used for debugging and tracing purposes.

During normal operation, it should be set to Off to lessen the effect on

system performance.

XML

configuration

file:

Shows the configuration in raw format. This option is used only by

Dialogic Support.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 225 226

Keine Kommentare

Dialogic 4000 Series SU4.1 Bedienungsanleitung Seite 82