Dialogic 4000 Series SU4.1 Bedienungsanleitung PDF herunterladen (Seite 35)

Dialogic® Diva® SIPcontrol™ Configuration

 A restart of Diva SIPcontrol is recommended if you change the IP address or the port

on which SIPcontrol is listening. If you do not restart, Diva SIPcontrol will continue

listening on the previously configured port and IP address.

Note: The restart will terminate active connections.

 The names for specific configuration elements are limited to 32 alphanumeric

characters and must not be repeated, i.e., you cannot assign the same name for two

SIP peers.

 The configuration session times out after 30 minutes of inactivity and a new login is

required to access the session again. If the new login screen appears when you try

to save the configuration, login again and click the "Back" button of the browser. The

configuration session opens with the settings before the time out and you can save

the configuration.

 To restart the Dialogic

Diva

WebConfig service, in the SIPcontrol web interface,

click System control on the left hand side, and then click Restart in the System

status management section.

 Diva SIPcontrol provides a secure configuration via the web interface (HTTPS). The

default port for HTTPS is 10006. Diva SIPcontrol provides a default certificate, but for

security reasons you can install your own webserver certificates. To install a

webserver certificate and corresponding key file, upload and install these files in the

Webserver certificate management section under System Control.

 To use TLS for SIP calls, you need to upload the certificates as described under

Security Profiles and enable the TLS port as described under Network Interfaces.

 To open the online help for a specific parameter, click the parameter, and a window

with the help text will appear.

Configuring Dialogic® Diva® SIPcontrol™

At a minimum, a Diva SIPcontrol configuration must contain the following components:

 At least one enabled network interface

 At least one enabled SIP peer

 At least one route for PSTN to SIP calls and another route for SIP to PSTN calls

There are four ways to configure Diva SIPcontrol:

 Use the Configuration Wizard.

 Load an existing configuration profile

 Import an existing configuration file

 Configure Diva SIPcontrol manually

Using the Configuration Wizard

The easiest way to configure Diva SIPcontrol is to use the Diva SIPcontrol configuration

wizard. The wizard provides a step-by-step interface that helps you generate configurations

for the following use cases:

 Empty configuration that resets existing Diva SIPcontrol web interface settings

 Simple configuration for a general purpose gateway

 DMG4000 hybrid gateway

 DMG4000 Survivable Branch Appliance

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 225 226

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic 4000 Series SU4.1 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Dialogic 4000 Series SU4.1