Dialogic 4000 Series SU4.1 Bedienungsanleitung PDF herunterladen (Seite 190)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

182

Under Enhanced, select the codec you defined for the ATA as the Codec profile, and

disable Reliable provisional response.

Under Address Normalization, select the configured dialplan.

Click OK to save the settings and close the window.

Create the third SIP peer for the second ATA extension. Use the same configuration

values as you did for the first ATA extension, except for the values of the Name, Host,

and Port parameters in the General section.

Create the fourth SIP peer as a dummy peer that will be used for rejecting calls. (The

routing rules will determine which calls will be rejected.) To create this SIP peer, open

the SIP Peers section, click Add, and enter values for the Name, Host, and

Port parameters in the General section. The values for these parameters do not

matter. For example:

Click OK to save the settings and close the window.

Creating Routes for This Scenario

Create the routes in the following order:

Create the first route to block numbers from the PSTN that have the same extension as

the ATA (extensions 2201 and 2202). To create the first route, open the Routing

section, click Add and configure the following parameters:

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 225 226

Keine Kommentare

Dialogic 4000 Series SU4.1 Bedienungsanleitung Seite 190