Dialogic DSI SS7MD Bedienungsanleitung Seite 158
- Seite / 176
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
158
Chapter 9 Remote Data Center Operation
9.5.3 Periodic Reports
Periodic reports, once created, are periodically transferred to the RDC. The user can configure the transfer
interval ranging from five minutes to 24 hours. Each report type should be collected in a different directory.
A file is created on the RDC during the first transfer for each report type during any 24 hour period beginning
at midnight. Filenames are unique, identifying the date of transfer in the form YYYYMMDD.
Periodic report data can optionally be reset, (all values to zero), following each file transfer.
SS7 Signaling Link Traffic Measurements
Traffic measurement data can be generated for each SS7 signaling link.
The following examples describe how a periodic report is first created before SS7 Links (C7LINK) are selected
as the collection points:
RDPRI:REPORT=1,PRTYPE=MSC7,PERIOD=01:00:00,RDC1=4,
RESET=Y,LABEL=C7LINK;
The RDPRI command creates report number 1 that is of type MSC7. The contents of the report is transferred
to the RDC once each period.
RDC number 4 is the primary RDC; no secondary RDC is identified in the example. Reports are transferred to
the C7LINK directory on the RDC. Because the RESET parameter has been set to ‘Y’, data for each SS7 link
associated with this report is reset following each file transfer.
Once the periodic report has been initialized, existing SS7 links can be dynamically associated with it using
the RDPDI command or removed with the RDPDE command, for example:
RDPDI:REPORT=1,C7LINK=2&3;
RDPDE:REPORT=1,C7LINK=3;
The RDPDI command identifies SS7 links 2 and 3 as collection points for report 1. The RDPDE command
removes SS7 link 3 from the report.
PCM Traffic Measurements
Periodic reports conveying PCM performance data can be configured using the RDPRI command. PCMs are
associated with the report using the RDPDI command. PCMs can be removed from the report using the
RDPDE command.
The PRTYPE parameter should be MSPCM.
SIGTRAN Link Traffic Measurements
Periodic reports conveying SIGTRAN link performance data can be configured using the RDPRI command.
SIGTRAN Links (SNLINK) are associated with the report using the RDPDI command. SIGTRAN Links can be
removed from the report using the RDPDE command.
The PRTYPE parameter should be MSSL.
Ethernet Port Traffic Measurements
Periodic reports conveying Ethernet performance data can be configured using the RDPRI command. ETH
ports are associated with the report using the RDPDI command. ETH ports can be removed from the report
using the RDPDE command.
The PRTYPE parameter should be MSEP.
System Measurements
Periodic reports conveying system performance data can be configured using the RDPRI command. There are
no associated data types for use with this command.
The PRTYPE parameter should be MSSY.
- Dialogic 1
- DSI Signaling Servers 1
- Copyright and Legal Notice 2
- Publication Date: August 2008 2
- Document Number: 05-2304-005 2
- Contents 3
- Revision History 8
- Chapter 1: Overview 9
- Chapter 1 Overview 10
- Chapter 2: Specification 17
- 2.3.2 Dialogic 19
- Chapter 2 Specification 20
- Chapter 4: Operation 27
- Chapter 4 Operation 28
- Are you sure? [Y/N] 29
- CNSYS:SECURE=Y; 31
- 5.3.2 MTP3-Specific Timers 47
- Table 6. MTP3 ITU Timers 47
- Table 7. MTP3 ANSI Timers 47
- ALCLS:CLA=,CODE=…; 50
- ALCLS:CLA=3,CODE=20; 50
- ALCLP[:CLA=]; 50
- CNMOI:C7LINK=,STS=,RTS=; 58
- CNMOE:C7LINK=; 58
- CNMOE:C7LINK=1; 58
- CNPCC:PCM=1-1,SYNCPRI=3; 62
- CNPCE:PCM=; 62
- CNPCE:PCM=1-1; 62
- • The RDC is blocked 64
- OFFSET value to take effect 70
- CNUSC:USER=3,AUTH=SHA; 75
- CNUSE:USER=; 75
- CNUSE:USER=3; 75
- CNXCI:OTS=,ITS=,[DUPLEX=]; 77
- CNXCE:OTS=,[DUPLEX=,]; 77
- CNXCE:OTS=1-1-16; 77
- C7LSE:LS=; 80
- C7LSE:LS=1; 80
- C7RTC:C7RT=1,NC=1,LS1=2; 82
- C7RTE:C7RT=,NC=; 82
- C7RTE:C7RT=1,NC=1; 82
- IPEPS:ETH=1,SPEED=100; 86
- IPEPS:ETH=4,IPADDR=STANDBY2; 86
- • MMPTP - MML Port Print 89
- • MMLOP - MML Log Off Print 89
- • MMLOS - MML Log Off Set 89
- • MMPTC - MML Port Change 89
- Attributes 91
- Examples 91
- Output Format 91
- Chapter 6 Command Definitions 100
- RDC1=1,LABEL=ALARM; 102
- RDCRE:RECORD=,[DISCARD=Y]; 103
- RDCRE:RECORD=1; 103
- SGDPI:DEST=1, RAS=1; 108
- SGDPI:DEST=,RTPRI=,[LABEL=,]; 108
- SGDPI:DEST=,RAS=,[LABEL=,]; 108
- SGDPC:DEST=1, RAS=1; 109
- SGDPE:DEST=; 109
- SGDPE:DEST=1; 109
- SGDPP:[DEST=]; 109
- SGIRC:IR=1,DEST=5; 111
- SGIRE:IR=; 111
- SGIRE:IR=1; 111
- SGIRP:[IR=]; 111
- SNALI:RAS=,SEQ=,SNLINK=; 114
- SNALI:RAS=1,SEQ=1,SNLINK=1; 114
- SNRAE:RAS=; 116
- SNRAE:RAS=1; 116
- IPADDR2=192.112.111.123;; 119
- SNSLC:SNLINK=1, PPORT=2905; 120
- SNSLE:SNLINK=; 120
- SNSLE:SNLINK=1; 120
- STIPP:IPADDR=173.132.23.3; 128
- IP Status 128
- EXECUTED 128
- • Status 133
- • Stratum 133
- • Offset 133
- 193.145.185.151 135
- 173.132.73.122 135
- 173.132.73.21 135
- 193.145.185.149 135
- Signaling 137
- 193.145.185.154 138
- SGDPI:DEST=2,RTPRI=MTP; 141
- • itself 143
- • an IP address of 0.0.0.0 143
- 194.192.185.11 145
- 192.195.185.11 145
- 192.195.185.12 145
- 194.192.185.12 145
- RESET=Y,LABEL=C7LINK; 158
- RDPDE:REPORT=1,C7LINK=3; 158
- 194.192.185.111 166
- 195.193.185.12 167
- 195.193.185.11 167
- 195.193.185.111 167
- 11.3.2 SG 2 Configuration 168
- STTPP command 169
- Chapter 13: Command Summary 171
- Chapter 13 Command Summary 172
- Glossary 175
- Chapter 14 Glossary 176
Verwandte Produkte und Handbücher für Vernetzung Dialogic DSI SS7MD
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern