Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 87)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

6.7.2 IPEPP – Display Ethernet Port Configuration

Synopsis

This command displays the Ethernet port configuration. An Ethernet port speed displayed with an H indicates

it is half-duplex, otherwise it is full-duplex.

Syntax

IPEPP;

Prerequisites

None.

Attributes

None.

Examples

IPEPP;

Output Format

<ipepp;

ETH SPEED IPADDR SUBNET SCTP

1 AUTO 172.28.148.109 255.255.255.0 Y

2 AUTO 200.2.2.1 255.255.255.0 Y

3 AUTO 0.0.0.0 255.255.255.0 Y

4 AUTO 0.0.0.0 255.255.255.0 N

EXECUTED

6.7.3 IPGWI – Internet Protocol Gateway Initiate

Synopsis

This command allows the user to specify a route (IPGW) to a IP network (IPNW) via an IP gateway

(GATEWAY) for a range of IP addresses within that network as defined by a network mask (MASK).

Syntax

IPGWI:IPGW=DEFAULT,GATEWAY=;

IPGWI:IPGW={1..31},MASK=,GATEWAY=,IPNW=;

Prerequisites

• The IP gateway ID has not been initiated.

• Two gateways cannot have overlapping IP addresses.

Attributes

CONFIG

Examples

IPGWI:IPGW=1,MASK=255.255.255.0,GATEWAY=194.192.185.1,

IPNW=128.66.1.0;

IPGWI:IPGW=DEFAULT, GATEWAY=123.124.125.1;

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 175 176

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 87