Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 51)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

Examples

ALCLP:CLA=3;

ALCLP:CLA=4;

ALCLP:CLA=5;

ALCLP;

Output Format

Alarm Fault Codes

CODE CLA TITLE

11 4Processor1 fail

EXECUTED

6.4.3 ALFCP – Alarm Fault Code Print

Synopsis

This command gives a printout of the alarm class of the specified fault code(s).

The alarm class (CLA) is used to determine whether the alarm is classed as Minor, Major or Critical and in

turn governs the alarm LED, relay and SNMP alarm that are activated when the condition exists.

Each alarm code (CODE) has a factory-set default class. See Chapter 8, “Alarm Fault Code Listing” for the

factory default for each alarm code.

Syntax

ALFCP[:CODE=…];

Prerequisites

None

Attributes

None

Examples

ALFCP;

ALFCP:CODE=8;

Output Format

Alarm Fault Codes

CODE CLA TITLE

8 4 In-band AIS

EXECUTED

6.4.4 ALLIP – Alarm List Print

Synopsis

This command gives a printout of all ACTIVE fault codes stored in the system’s alarm log.

Each fault code (CODE) is associated with an alarm class (CLA) which may be Minor, Major or Critical. The

alarm class in turn governs which alarm LED, relay or SNMP alarm is activated when the condition exists.

The command provides an indication of the time that the alarm occurred (OCCURRED), the alarm class (CLA

indicating either a System, PCM or signaling failure) as well as an alarm code specific identifier (ID) and

diagnostic field (DIAG).

See Chapter 8, “Alarm Fault Code Listing” for the definitions of the alarm code specific parameters.

Note: The meaning of the ID field depends on the alarm code and is described in Chapter 8, “Alarm

Fault Code Listing”.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Dialogic DSI SS7MD