Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 90)

Chapter 6 Command Definitions

6.8.3 MMLOS – MML Log Off Set

Synopsis

This command sets the current log-on time-out (TLO) and timeout warning (TLOW) parameters. If TLOW is

set to zero, the automatic time-out is disabled. If port (PORT) is omitted, the command applies to all ports.

Syntax

MMLOS:{[TLO=,][TLOW=,]}[PORT=,];

Prerequisites

None

Attributes

CONFIG

Examples

MMLOS:TLO=35;

MMLOS:TLOW=19;

6.8.4 MMPTC – MML Port Change

Synopsis

This command sets the data input/output parameters for serial and telnet data ports.

Note: Only serial port 2 (COM2) is accessible by the user.

Syntax

MMPTC:PORT=,{[BAUD=,][DBITS=,][PARITY=,][SBITS=,][LINES=,][PTMODE=,]};

Prerequisites

• No user must be logged on to the port affected.

• For the telnet ports, only the LINES parameter can be changed.

Attributes

CONFIG

Examples

MMPTC:PORT=2,BAUD=300;

MMPTC:PORT=2,SBITS=2;

6.8.5 MMPTP – MML Port Print

Synopsis

This command gives a printout of the attributes of the serial port. Where the PORT parameter is omitted, the

printout is provided for all ports. The connected port executing this command is marked with a “*”.

Note: Only serial port 2 (COM2) is accessible by the user.

Syntax

MMPTP[:PORT=];

Prerequisites

None

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 175 176

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 90