Dialogic DSI SS7MD Bedienungsanleitung Seite 39
- Seite / 176
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
39
Dialogic
®
DSI Signaling Server SGW Mode User Manual Issue 5
FF
PCM frame format:
• G704 – Normal E1 format described
in G.704
• CRC4 – Normal E1 format with CRC4
checksum generation
• CRC4C – Normal E1 format with
CRC4 checksum generation.
Compatible with non-CRC4
operation.
• SF – 12 frame multiframe (D3/D4)
• ESF – 24-frame multiframe
• CRC6 – ESF format with CRC6
checksum generation
• CRC4G706 – CRC4 G.706 compatible
mode
• UNS - Unstructured High Speed Link
NOTE: Out of CRC4-multiframe, E-Bits
are transmitted as zeroes.
One of:
• G704
•CRC4
•CRC4C
•SF
•ESF
•CRC6
• CRC4G706
Default =
• G704 for E1
•SF for T1
UNS - can only be
specified on SS7HDP
signaling boards.
FILE
File name on a Remote Data Center
(RDC)
0 to 12
<text character>
FTPPWD
FTP Password enabled parameter. Set to
Y to enable
ftp password protection, or N
to disable password protection.
Y or N Default = Y
FTPSER
Indicates whether the Signaling Gateway
can act as a
ftp server or not. Set to Y to
enable the
ftp server, or N to disable the
ftp server.
Y or N Default = Y
GATEWAY
An IP gateway used to reach other
networks when the destination is not on
the local sub-net. Specified using dot
notation, that is, www.xxx.yyy.zzz
www – 0 to 255
xxx – 0 to 255
yyy – 0 to 255
zzz – 0 to 255
Default = 0.0.0.0
HPORT Host SCTP port 1 to 65535
Default =
• 2905 for M3UA
SNLINKs.
• 3565 for M2PA
SNLINKs.
HSL High Speed Link mode
N – The SS7 link is not an
HSL Link.
Y – The SS7 link is an HSL
link with 12 bit sequence
numbers.
SQ7 - SS7 link is an HSL
link with 7 bit sequence
numbers.
IMPAIR SNMP object transition state.
One of:
•All
•Create
•Change
•Destroy
•None
Traps will be generated
if set to All, Create,
Change or Destroy.
Traps will not be
generated if set to
NONE.
Default = Change
INACTIVE
SNMP object transition state.
One of:
•All
•Create
•Change
•Destroy
•None
Traps will be generated
if set to All, Create,
Change or Destroy.
Traps will not be
generated if set to
NONE.
Default = Change
INHIBIT
Invoke/revoke MTP3 management
inhibiting of an SS7 signaling link
Y or N Default = N
Table 3. Parameter Definitions (Continued)
Name Description Range Notes
- Dialogic 1
- DSI Signaling Servers 1
- Copyright and Legal Notice 2
- Publication Date: August 2008 2
- Document Number: 05-2304-005 2
- Contents 3
- Revision History 8
- Chapter 1: Overview 9
- Chapter 1 Overview 10
- Chapter 2: Specification 17
- 2.3.2 Dialogic 19
- Chapter 2 Specification 20
- Chapter 4: Operation 27
- Chapter 4 Operation 28
- Are you sure? [Y/N] 29
- CNSYS:SECURE=Y; 31
- 5.3.2 MTP3-Specific Timers 47
- Table 6. MTP3 ITU Timers 47
- Table 7. MTP3 ANSI Timers 47
- ALCLS:CLA=,CODE=…; 50
- ALCLS:CLA=3,CODE=20; 50
- ALCLP[:CLA=]; 50
- CNMOI:C7LINK=,STS=,RTS=; 58
- CNMOE:C7LINK=; 58
- CNMOE:C7LINK=1; 58
- CNPCC:PCM=1-1,SYNCPRI=3; 62
- CNPCE:PCM=; 62
- CNPCE:PCM=1-1; 62
- • The RDC is blocked 64
- OFFSET value to take effect 70
- CNUSC:USER=3,AUTH=SHA; 75
- CNUSE:USER=; 75
- CNUSE:USER=3; 75
- CNXCI:OTS=,ITS=,[DUPLEX=]; 77
- CNXCE:OTS=,[DUPLEX=,]; 77
- CNXCE:OTS=1-1-16; 77
- C7LSE:LS=; 80
- C7LSE:LS=1; 80
- C7RTC:C7RT=1,NC=1,LS1=2; 82
- C7RTE:C7RT=,NC=; 82
- C7RTE:C7RT=1,NC=1; 82
- IPEPS:ETH=1,SPEED=100; 86
- IPEPS:ETH=4,IPADDR=STANDBY2; 86
- • MMPTP - MML Port Print 89
- • MMLOP - MML Log Off Print 89
- • MMLOS - MML Log Off Set 89
- • MMPTC - MML Port Change 89
- Attributes 91
- Examples 91
- Output Format 91
- Chapter 6 Command Definitions 100
- RDC1=1,LABEL=ALARM; 102
- RDCRE:RECORD=,[DISCARD=Y]; 103
- RDCRE:RECORD=1; 103
- SGDPI:DEST=1, RAS=1; 108
- SGDPI:DEST=,RTPRI=,[LABEL=,]; 108
- SGDPI:DEST=,RAS=,[LABEL=,]; 108
- SGDPC:DEST=1, RAS=1; 109
- SGDPE:DEST=; 109
- SGDPE:DEST=1; 109
- SGDPP:[DEST=]; 109
- SGIRC:IR=1,DEST=5; 111
- SGIRE:IR=; 111
- SGIRE:IR=1; 111
- SGIRP:[IR=]; 111
- SNALI:RAS=,SEQ=,SNLINK=; 114
- SNALI:RAS=1,SEQ=1,SNLINK=1; 114
- SNRAE:RAS=; 116
- SNRAE:RAS=1; 116
- IPADDR2=192.112.111.123;; 119
- SNSLC:SNLINK=1, PPORT=2905; 120
- SNSLE:SNLINK=; 120
- SNSLE:SNLINK=1; 120
- STIPP:IPADDR=173.132.23.3; 128
- IP Status 128
- EXECUTED 128
- • Status 133
- • Stratum 133
- • Offset 133
- 193.145.185.151 135
- 173.132.73.122 135
- 173.132.73.21 135
- 193.145.185.149 135
- Signaling 137
- 193.145.185.154 138
- SGDPI:DEST=2,RTPRI=MTP; 141
- • itself 143
- • an IP address of 0.0.0.0 143
- 194.192.185.11 145
- 192.195.185.11 145
- 192.195.185.12 145
- 194.192.185.12 145
- RESET=Y,LABEL=C7LINK; 158
- RDPDE:REPORT=1,C7LINK=3; 158
- 194.192.185.111 166
- 195.193.185.12 167
- 195.193.185.11 167
- 195.193.185.111 167
- 11.3.2 SG 2 Configuration 168
- STTPP command 169
- Chapter 13: Command Summary 171
- Chapter 13 Command Summary 172
- Glossary 175
- Chapter 14 Glossary 176
Verwandte Produkte und Handbücher für Vernetzung Dialogic DSI SS7MD
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern