Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 72)

Chapter 6 Command Definitions

6.5.30 CNTOP – Configuration Timeout Value Print

Synopsis

This command is used to print the value of either a single timer or all the timers for a particular protocol

module. (Refer to CNTOS command to set timer values.)

Syntax

CNTOP:TTYPE=,[TO=,];

Prerequisites

None

Attributes

None

Examples

CNTOP:TTYPE=MTP3;

Output Format

Timeout Values:

TTYPE TO TSEC TMSEC

MTP3 1 60

MTP3 2 360

MTP3 3 120

MTP3 4 360

MTP3 5 5

MTP3 6 5

MTP3 7 3

MTP3 10 60

EXECUTED

6.5.31 CNTPE – Configuration Network Time Protocol Server End

Synopsis

This command is used to remove an NTP Server from the configuration of the system.

Syntax

CNTPE:NTPSER;

Prerequisites

The specified NTPSER must already be configured.

Attributes

CONFIG - The command affects configuration data.

Example

CNTPE:NTPSER=1;

6.5.32 CNTPI – Configuration Network Time Protocol Server Initiate

Synopsis

This command is used to add an NTP server to the configuration of the system. The NTP service should be

activated using the CNTDS command.

Syntax

CNTPI:NTPSER=,IPADDR=,[LABEL=];

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 175 176

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 72