Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 85)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

• If an SNLINK is specified, it’s SNTYPE must be M2PA.

• If an SNLINK is specified, it must be initiated, blocked and cannot be associated with any other SS7 link.

• The command cannot change between SNLINK and EQU type C7LINKs.

• SS7 links can use signaling processors 1 to 4 on a Dialogic

DSI SPCI4 or SPCI2S Network Interface

Board or 1 to 64 on a Dialogic

DSI SS7HDP Network Interface Board.

Attributes

CONFIG

Examples

C7SLC:C7LINK=4,EQU=2-3,TS=3-3-16,M56K=1;

6.6.11 C7SLE – CCS SS7 Signaling Link End

Synopsis

This command is used to end an SS7 signaling link.

Syntax

C7SLE:C7LINK=;

Prerequisites

• The signaling link must be blocked.

• The signaling link must not be monitored.

Attributes

CONFIG

Examples

C7SLE:C7LINK=1;

6.6.12 C7SLP – CCS SS7 Signaling Link Print

Synopsis

This command is used to obtain a printout of the attributes of SS7 signaling link(s). If no link is specified, all

initialized links are output.

Syntax

C7SLP:[C7LINK=…];

Prerequisites

None

Attributes

None

Examples

C7SLP:C7LINK=1;

C7SLP;

Output Format

Signaling Link Configuration

C7LINK EQU TS SNLINK LS SLC M56K PCR

1 1-1 1-3-16 1 0 0 N

2 1-2 2-3-16 1 1 0 N

3 1 2 0 0 N

4 2 2 1 0 N

EXECUTED

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Dialogic DSI SS7MD