Dialogic DSI SS7MD Bedienungsanleitung PDF herunterladen (Seite 93)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

6.9.2 MNBLE – Maintenance Blocking End

Synopsis

This command ends the blocked condition of boards, signaling links, remote data centers, SIGTRAN links and

SIGTRAN Application Servers and brings them into service. The command restores configuration data to the

lower levels of the Signaling Gateway and brings the timeslots into service. Possible groupings are:

• SS7 signaling links

• Boards

• Remote Data Centers (RDCs)

• SIGTRAN signaling links

• SIGTRAN Application Servers

Note: If an RDC has previously been blocked but a file transfer was already in progress, subsequent

MNBLE commands which use that RDC fail with “NO SYSTEM RESOURCES” until the file transfer

is complete.

Syntax

MNBLE:C7LINK=…;

MNBLE:BPOS=…;

MNBLE:RDC=…;

MNBLE:SNLINK=…;

MNBLE:RAS=…;

Prerequisites

• The item being unblocked has been initiated and is currently blocked.

• When unblocking an SS7 link with a signaling processor (EQU), both the board containing the signaling

processor and the board containing the signaling timeslot must already be unblocked.

• An SS7 link with a signaling processor (EQU) cannot be unblocked until all the boards processing the SS7

signaling are blocked and then unblocked.

• An SS7 link cannot be unblocked if it is on a C7 route that has more than one link set and those link sets

have either different OPCs, SS7MDs, NCs or NIs.

• An RAS cannot be unblocked unless it has a SNLINK attached.

• An M3UA SNLINK must have a default NC or a mapping of an NA into an NC.

• An M3UA SNLINK must have a mapping of an NA into an NC or a default NC matching the RAS NC the

SNLINK is attached to.

• All the underlying SNLINKs of a RAS must have a mapping of an NA into an NC or a default NC matching

the RAS NC.

• A C7LINK cannot be unblocked if an associated SNLINK is blocked.

• A network facing M2PA C7LINK can only be unblocked if the Signaling Gateway is licensed for M2PA

operation.

• If the M3UASHARE parameter is blank only M3UA links or only M2PA links can be unblocked. If

M3UASHARE has a value between 1-99 then all SIGTRAN links types can be unblocked.

Note: M2PA can be used for DUAL operation without a license.

Attributes

CONFIG

Examples

MNBLE:C7LINK=4;

Output Format

Unblocking C7LINK 1

EXECUTED

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare

Dialogic DSI SS7MD Bedienungsanleitung Seite 93

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Dialogic DSI SS7MD